Compliant with RoHS
Low Noize
Good Contact Performance
Insulating Material
Dual Unit
Application
The RCA connector was originally used for audio signals. It has been used for purposes including RF connectors,DC power connectors, and speaker and video cable connectors.RCA connectors and cables are also commonly used for transmision of digital audio in S/PDIF format, with plugs colored to distinguish them from other typical connections.
Color Code Options:
The Female RCA Jack are often color-coded, yellow for composite video,red for the right audio channel, and Black or white for the left channel of stereo audio.
| Composite analog video | Composite | Yellow |
| Analog audio | Left/Mono (record if 4 connector tape cable) | White |
| Right (record if 4 connector tape cable) | Red |
| Right tape (play if 4 connector tape cable) | Yellow |
| Left tape (play if 4 connector tape cable) | Black |
| Digital audio | S/PDIF | Orange |
| Component analog video (YPBPR) | Y | Green |
| PB/CB | Blue |
| PR/CR | Red |
| Component analog video/VGA (RGB/HV) | G | Green |
| R | Red |
| B | Blue |
| V (Vertical sync) | White |
| H (Horizontal sync)/S(Composite Sync) | Yellow |
Product Specification:
| 1.Mechanical Specification |
| Insertion force | 30N Max |
| Withdraw force | 8N Min. |
| Withdraw force for center contact | 5N Min(Use a OD=3.2±0.05mm,Length=14士0.20mm gauge plug) |
| Withstanding force for the terminal | 30N Max applied in pulled direction for 5 seconds |
| 2.Electrical Specification |
| Power Rating | 30V/DC.1.0A. |
| Contact resistance | 30mΩ Max. |
| Insulation resistance | 100MΩ Min. |
| Dielectric withtanding voltage | 500V AC RMS After 1 Minute |
| 3.Durability Performance |
| Life Cycles | Pull in and out 1,500 Cycles Min. |
| 4.Environmental Performance |
| Temperatrue range | -40℃ to +70℃ |
| Salt spray | 24 Hours |
Our Advantage
1.Design and prototype& automation basis in Dongguan which is the manufacturing center of South China.
2.Manufacture Center in Sichuan Province which is close to Yangzi River wharf and Chongqing Airport .
3.10+ dedicated and experienced engineers and designers in R&D department.
4.10+ production lines, 100+ experienced managers and workers.
5.Help customers quickly design their ideas into mass productions, and complete prototype design, development and verification.
Our Services
1. Offer customization to meet all your need
2. Offer 24 hours to reply your inquiries
3. Strong R&D team for technical support
4.Can accept lower MOQ and flexible lead time
FAQ
1.Q: Can you do OEM/ODM?
A: Yes, both OEM and ODM services are acceptable and we can also print your logo and make your packaging according to your requirements.
2.Q: Are you a factory or a trading company?
A: We are the manufacturer of foot switch......
3.Q: How is your product quality?
A: We always put emphasis on the quality of our product. Our product are 100% tested and inspected before shipment.
4.Q: How do you ship the goods?
A: The products will be sent to you by optional shipping service, such express, air cargo, sea transportation.
